The $7 FIX That Saves You HOURS + MONEY
5
⚠️ THE PROBLEM
CORE BIT = STUCK LIKE IT’S WELDED
- 🔨 Hammering it off
- 🔥 Heating the shaft
- ⏱ Losing 20–30 minutes
- 💥 Damaging threads
👉 EVERY contractor has fought this
💥 WHY IT HAPPENS
HEAT + SLURRY + STEEL = SEIZURE
- Water + slurry → corrosion
- Heat → expansion
- Steel-on-steel → binding
- Dried slurry → acts like glue
👉 RESULT: LOCKED CORE BIT
🔧 THE SIMPLE FIX
🟡 ANTI-SEIZE BUSHING / RING
✔ Stops metal-to-metal contact
✔ Prevents thread galling
✔ Makes removal EASY
✔ Protects your rig
💰 Cost: $5–$15
👉 Saves: HOURS + EQUIPMENT
⚙️ CHOOSE YOUR SETUP
🟡 BRASS / COPPER RING
- Soft barrier
- Absorbs pressure
- Prevents locking
👉 Best for everyday wet coring
⚪ NYLON BUSHING
- No rust
- Low friction
- Clean operation
👉 Best for heavy slurry jobs
🔩 DRIVE PLATE
- Spreads torque load
- Reduces thread stress
- Built-in protection
👉 Best for production crews
❌ WRONG vs ✔ RIGHT
❌ NO BUSHING
- Stuck bits
- Damaged spindle
- Lost time
- Frustration
✔ WITH BUSHING
- Smooth removal
- Protected threads
- Faster jobs
- More profit
💰 REAL JOBSITE MATH
Without:
- 15 min × 3 times/week
- = 45 min lost
- = $56/week labor
👉 $2,900+ per year wasted
With:
- $10 bushing
👉 NO BRAINER
🛠️ PRO METHOD
- Clean spindle threads
- Drop in bushing
- Thread bit (DON’T overtighten)
- Drill normally
- Remove EASY
💡 Add anti-seize compound for extreme jobs
🚨 WARNING SIGNS
- Bit hard to remove
- Threads starting to gall
- Using pipe wrench often
- Already damaged a spindle
👉 YOU’RE OVERDUE
🧠 REAL CONTRACTOR ADVICE
40+ YEARS IN THE FIELD
You don’t need:
❌ A new core bit
❌ A new rig
👉 You need a simple bushing
📦 ORDER YOUR BUSHINGS
🟡 Anti-Seize Bushings – ONLY $7.60 EACH
📧 Email to Order: bladeguy@att.net
👉 Fast, simple, contractor-direct ordering
👉 Keep a few in your truck — you WILL need them
📲 GET MORE REAL JOBSITE TIPS
bladeguypro.com/
NO SALES. JUST WHAT WORKS.
Leave a Reply